How to set up a6x10 Component Speaker for your home theater setup:1.
Set up the home theater speaker to fit the space available on your room floor.
I used a 4′ by 6′ room.
You may want to use a smaller room or use an empty space.2.
Place the speakers on a 6’x8′ planter in the center of your living room.
Make sure the room has enough floor space to accommodate the 6′ speakers.3.
Place your 6′ x 6′ plan for 6 speakers in the middle of the room.4.
Turn the projector off and place your 6×8 planter on the floor.5.
Add your 6 speakers to the center, 4 of them facing forward, and the other 4 facing backwards.6.
Put the projector on your wall and start playing.
You will need to set your TV to a fixed angle to get good sound.7.
Turn on the projector.
You should hear a crisp, clear sound.8.
Turn off the projector and set the TV to 60 degrees and set your speakers to 60 percent.9.
Turn it on again and set it to 60 degree.10.
The 6×4 plan is perfect for the space on the wall that you need for your 6 speaker system.
I did a little bit of tweaking to get it to play, but that was it.